1 機頭配置熔體壓力及熔體溫度傳感器，具有螺桿轉速熔體壓力閉環控制功能。 2 液晶觸摸屏與晶點檢測儀實時互聯互通，在線實時展示晶點檢測數據 3 配置薄膜斷裂監測功能，薄膜發生斷裂故障時自動聲光預警。 4 實時采集并可視化展示收卷卷材直徑，卷徑達到滿卷設定閾值時啟動聲光報警。 5 預留晶點檢測儀安裝位置，用于晶點在線檢測。 6 整個收卷和冷輥系統安置在電動滑軌上，易于清潔模頭和維護。 料筒及螺桿標配： 一根分散性單螺桿 料筒及螺桿材料均為38CrMoAlA優質氮化鋼 氮化層深度:0.4～0.7mm,氮化硬度:螺桿850HV,料筒930HV 螺桿螺棱表面粗糙度:0.4um 料筒內表面粗糙度:0.4um The machine head is equipped with melt pressure and melt temperature sensors, and features a closed-loop control system for screw rotational speed and melt pressure. 2. The LCD touch screen and crystal point detector are seamlessly integrated for real-time communication, enabling online real-time display of crystal point detection data; 3. Equipped with a thin-film fracture monitoring function that automatically triggers audible and visual alarms when a thin-film fracture fault occurs. 4: Real-time collection and visual display of the coil material diameter; when the coil diameter reaches the preset full-coil threshold, an audible and visual alarm is triggered. 5 Reserve the installation location for the crystal dot detector for online crystal dot inspection. 6: The entire winding and cold roller system is mounted on electric linear guides, facilitating easy cleaning of the die head and maintenance. Standard configuration for the barrel and screw: The dispersed single-screw extruder consists of both the screw barrel and the screw material, both made of high-quality nitrided steel 38CrMoAlA; the nitriding layer depth is: 0.4–0.7 mm; the nitrided hardness is: 850 HV for the screw and 930 HV for the barrel; the surface roughness of the screw's helical flange is: 0.4 μm; and the surface roughness of the inner surface of the barrel is: 0.4 μm.